Solid Surface in Commercial Fit-outs
We do not sell solid-surface sheets. We use solid surface to fabricate seamless counters, reception desks, display units and project-specific features for cafés, restaurants, stores, showrooms and mall kiosks.
What we manufacture with it
Standchi is not a material supplier. Custom bar and service counters, cashier and reception desks, shaped display surfaces, integrated-sink worktops and selected back-lit features.
Material selection is part of a larger design-and-build project. Continue to the service that matches your space: Café Design · Restaurant Design · Store & Shop Design · Showroom Design · Mall Kiosk Design.
Why we use it in commercial fit-outs
Solid surface is a non-porous, homogeneous surface material made from acrylic/polyester resin combined with mineral filler. Because its best-known brand is Corian, it is called the 'Corian type'. Pieces are joined invisibly to create single-piece, seamless surfaces.
- Non-porous structure: Holds no liquid or bacteria; hygienic and stain-resistant.
- Thermoforming: Bends with heat into fluid, three-dimensional forms.
- Seamless joints: Pieces fuse chemically; the joint is invisible.
Options we specify by project
Appearance options
- Solid colour: A matt/silky surface from white to dark tones.
- Stone/mineral effect: Marble- and granite-look patterns.
- Translucent: Suitable for back-lighting in thin sections.
Forming capability
Thanks to thermoforming, curved counters, reception desks, lighting elements and three-dimensional wall panels can be produced.
What matters in fabrication
| Structure | Acrylic/polyester resin + mineral filler |
|---|---|
| Porosity | Non-porous — hygienic, stain-resistant |
| Joints | Invisible (seamless) chemical bonding |
| Forming | Thermoforming (heat bending) |
| Repair | Scratches can be removed by sanding/polishing |
| Thickness | 6 · 12 mm sheet; thickened at edges by lamination |
Where we use it
The first choice for surfaces that need hygiene and a seamless look:
- Bar, cashier and reception counters
- Service and prep counters (with integrated sink)
- Curved, shaped counters and display surfaces
- Back-lit decorative panels
- Wet-area and restroom counters
Why we specify it selectively
Advantages
- Seamless, single-piece look — no joints
- Non-porous: hygienic, holds no stains or bacteria
- Takes any form with heat (curves, 3D shapes)
- Scratches and impacts can be repaired (renewable surface)
Points to consider
- Less heat-resistant than natural stone (a hot pan can damage it)
- The surface is not as hard as natural stone
- A quality result needs expert workmanship and equipment
After installation
Daily cleaning is done with a damp cloth and soapy water. On matt surfaces stains and scratches can be removed with a white scouring pad; on gloss surfaces a manufacturer care product is used. Very hot pans should not be placed directly — use a trivet.
How we apply it at Standchi
We produce your solid-surface counters and desks with seamless joints and thermoforming capability. We prepare single-piece-look, hygienic surfaces — including integrated sinks, curved forms and back-lit panels — in our workshop and install them on site.
Let's design your seamless counter
Let's plan the right use of this material together in your café, restaurant, store or mall-stand project.
Get a Quote Production Capabilities