What is it?
Epoxy is a coating that, by mixing two components (resin + hardener), turns from liquid into a hard, seamless and glossy surface. It is used on counter and table surfaces, decorative casts and industrial floors.
- Coating epoxy: A thin, glossy and durable layer over an existing surface.
- Casting epoxy: Clear/coloured volumetric forms poured into a mould (river table).
- Floor epoxy: A seamless, hygienic and durable industrial floor.
Types & varieties
Application types
- Counter / table coating: Glossy, seamless, waterproof surface.
- Decorative casting: Wood-epoxy combinations, coloured/metallic effects.
- Floor systems: Self-levelling, non-slip or decorative flooring.
Effects & colour
With clear, coloured, metallic-pigment, pearl and 'ocean/marble' effects, each surface becomes unique; a matt or high-gloss finish can be chosen.
Technical properties
| Components | Resin + hardener (2 components) |
|---|---|
| Surface | Seamless, waterproof, gloss/matt |
| Curing | Full cure can take days depending on the system |
| Durability | High chemical and water resistance |
| Heat | Very hot contact should be avoided |
| Application | Requires expert workmanship and a controlled environment |
Use cases
Where a seamless, effect-rich surface is needed:
- Bar and table tops (glossy, decorative)
- Wood-epoxy river tables and display surfaces
- Industrial/hygienic floors (kitchen, service)
- Decorative wall and counter effects
- Surfaces needing water and stain resistance
Advantages & disadvantages
Advantages
- Seamless, waterproof and hygienic surface
- High gloss and a sense of depth
- Unlimited colour and decorative effects
- Resistant to chemicals and wear
Points to consider
- Application is delicate — temperature, humidity and workmanship are critical
- Scratches can be visible on high-gloss surfaces
- Very hot contact and constant UV can affect the surface
Care & cleaning
Wiped with a damp soft cloth; abrasives and harsh solvents are avoided. On high-gloss surfaces a microfibre cloth reduces marks. Hot pans should not be placed directly, and cutting should be done on a board.
How we apply it at Standchi
We prepare epoxy counters, decorative casts and floor applications under controlled workshop conditions with the right resin system and pigments. We design wood-epoxy combinations and effect surfaces to suit the project's concept, producing durable, seamless results.